How to Autel IM608 Program Dodge RAM 3500 2016 All Keys Lost

Purpose: Program Dodge RAM 3500 2016 all keys lost by Autel IM608

Case: I misplaced my keys on the job. I bought a new key to perform the all keys lost with IM608. My im608 battery was low and only had 14% as it was near the end of the day.

Equipments need:

2016 Dodge RAM 3500

Autel MaxiIM IM608 with J2534 ECU programmer

http://www.cardiagtool.co.uk/autel-maxiim-im608-diagnostic-and-key-programming-tool.html

Battery maintainer

Guide to program Dodge RAM 3500 2016 AKL:

Step 1: Read & Erase error codes

Step 2: Read Pincode

Step 3: Erase key

Step 4: Add key

Step 1: Read & Erase error codes

Select IMMO Status Scan

Turn the ignition on  

Establishing vehicle communication…

Read the existing faults

Note: it’s very important to clear all the fault codes especially in the BCM and PCM. Otherwise the procedure will not work.

Click “Quick erase DTC” to erase all the existing error codes

When all the fault status turn green, it indicate that the faults have been erased successfully

Step 2: Read Pincode

Turn the ignition off and turn on the emergency flashers

Read out the password successfully

Escape

Step 3: Erase key

Select “Key Learning”->“Erase key”

Click “Yes” to erase all keys

Turn the ignition off and turn on emergency flashers

Erase the key succeed

Step 4: Add key

Escape to “System Selection”

Select “Immobilizer”-> “Immobilizer CAN”

Turn the ignition on

Then select “Key Learning”

Please kindly notice:

Please place an unprogrammed FOBIK key into the ignition, make sure the ignition is in the LOCK position.

To learn programmed keys, you have to finish “Erase Key” first.

Current number of key is: 0.

Then click “OK” to continue

Learn the key successfully

Here only has one key, so click “No” to finish

That’s all!

Source:

http://www.cardiagtool.co.uk/autel-maxiim-im608-diagnostic-and-key-programming-tool.html